Wire-Cut Flushing Type EDM
Kent USA Flushing Type Wire EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine complex geometric forms with tooling wear and absolute consistency since there is no contact between the cutting wire and the workpiece surface. Parts formed through the Wire EDM process can be used immediately in assembly, with little or no additional finishing. Kent USA Flushing Type Wire EDMs can machine workpiece sizes of 558 mm x 470 mm x 114 mm to 1370 mm x 760 mm x 295 mm, workpiece weight of up to 1300 kgs, and a water tank capacity of up to 114 Liters. All Kent USA Flushing Type Wire EDMs are backed by our 15-month warranty.
- Machine structure designed and analyzed by CAE system for high structural rigidity.
- U, V, Z axis strategically placed on upper column for enhanced spindle rigidity and precision.
- Panasonic AC Servo motor (AWT System) and magnet power clutch wire-receiving systems.
- Permanent generator control system for wire tension stability
- Accurate linear guide ways coupled with patented linear and block design
Specifications
| Specification | WFI-50 | WFI-60 | WFI-70 | WFI-90 |
| Max Work Piece Size | 863 mm x520 mm x 294 mm | 1100 mm x 650 mm x 340 mm | 1170 mm x 678 mm x 294 mm | 1371 mm x 760 mm x 294 mm |
| Max Work Piece Weight | 700 kg | 1000 kg | 1000 kg | 1300 kg |
| Drive & Servo | 5 axes AC servo | 5 axes AC servo | 5 axes AC servo | 5 axes AC servo |
| Simulation Axis | X / Y / U / V (4 axes) | X / Y / U / V (4 axes) | X / Y / U / V (4 axes) | X / Y / U / V (4 axes) |
| X/Y-Axis Travel | 500 mm / 300 mm | 600 mm / 450 mm | 750 mm / 500 mm | 890 mm / 500 mm |
| Z-Axis Travel | 300 mm | 350 mm | 300 mm | 300 mm |
| U/V-Axis Travel | 99 mm / 99mm | 99 mm / 99mm | 99 mm / 99mm | 99 mm / 99mm |
| Wire Diameter Range | Ø 0.1~0.3 mm | Ø 0.1~0.3 mm | Ø 0.15~0.3 mm | Ø 0.1~0.3 mm |
| Max Taper Angle | ± 22.5° 99mm | ± 22.5° 99mm | ± 22.5° 99mm | ± 22.5° 99mm |
| Max Axes Load | 10 kg | 10 kg | 10 kg | 10 kg |
| Conductivity | Automatic | Automatic | Automatic | Automatic |
| Water Tank Capacity | 270 L | 360 L | 360 L | 360 L |
| Net Weight | 2300 kg | 3400 kg | 4000 kg | 5200 kg |
| Dimensions | 2600 mm x 2200 mm x 2150 mm | 3000 mm x 2692 mm x 2250 mm | 32000 mm x 2692 mm x 2260 mm | 3581 mm x 2895 mm x 2311 mm |
Accessories
Standard Accessories
- Automatic vertical alignment jig
- Power feed contact
- Filter
- Clamping tool
- Wire guide (Ø0.25 mm)
- Brass wire (Ø0.25 mm)
- Ion exchange resin (5L)
- Tool box
Optional Accessories
- ATW auto threading wire system
- Diameter guide upper + lower (0.25 mm)
- CAD/CAM Software
- Water chiller
- Power regulator / 15 kva
- Parallel bar – for setting the work piece
- Filter (2 pcs)
- Resin / 5L
- Brass Wire 0.25 mm / 3 kg
- Power feed contact (2 pcs)
- Water resistance meter
- Wire tension meter
- Wire speed meter
- Water nozzle (upper/lower)(2 pcs) / 1 set
- 22.5 degree water nozzle / set (upper/lower + diameter guide)
